Here you will find our FAQ (frequently asked questions) about rullywow.com PCB projects. We will update this list from time to time.
Q: What components do I need to order for these projects?
A: Each build guide specifies components you will need to complete the project. We have made a document here which explains what you will need to order. CLICK HERE
Q: What is included with the PCB projects?
A: Projects include the bare PCB, you supply the rest of the components.
Q: Where should I source my components?
A: We are unaffiliated with any of the following companies, however they are all great resources for parts
Q: What does the K stand for (say in a 4K7 resistor)?
A: The K is short for kiloohm and is used to ensure the decimal place is in the correct place. Therefore a 4K7 resistor would be a 4.7K ohm resistor
Q: What kind of solder should I use?
A: It’s personal preference, however we recommend leaded solder (if available in your area). Leaded solder is easier to work with and creates nice joints. Currently we like the Kester No-Clean 245 63/37 in a small diameter such as .033″ or .015″.
Q: I have a question not answered here.
A: Feel free to contact us at firstname.lastname@example.org